- The work material is supplied by the student and cutting and engraving tests will be carried out before final use.
If there is any error or accident for any reason and the material is damaged, the Model Workshop will not be responsible for replacing it.
- The materials that can be used in the laser machine are referenced in the following table. It is not possible to engrave or cut materials that are not listed in the table.
| MATERIAL | ENGRAVING | CUTTING | THICKNESS |
|---|---|---|---|
| Methacrylate / Acrylic | x | x | Up to 3 mm |
| PET y PETG | x | ||
| Polycarbonate | x | ||
| Polypropylene | x | ||
| Paper | x | x | Up to 2 mm |
| Cardboard any type | x | x | Up to mm |
| Sandpaper | x | x | Up to 1 mm |
| Ceramics | x | ||
| Wood chipboard | x | ||
| MDF | x | x | Up to 2 mm |
| Soft wood / balsa | x | x | Up to 3 mm |
| Hard wood | x | ||
| Pressed board | x | x | 0,3 mm |
| Corian | x | ||
| Textiles in general | x | x | Up to 1 mm |
| Cristal - Glass | x | ||
| Leather | x | x | Up to 1 mm |
| Leatherette | x | x | Up to 1 mm |
| Melamine | x | x | Up to 1 mm |
| Formica | x | ||
| Stone in general | x |