ONLY ONE FILE PER STUDENT will be accepted, drawn according to the regulations in DXF format and identified with their name, surname and a contact telephone number, subject, group and/or course.

Example: Name Surname1 Surname2_654123123123_subject_group_course.dxf

If you do not have a Spanish telephone number, you can use an EFFECTIVE and FUNCTIONAL email address.

- The template located on the website will be used to draw the parts on it. The drawing will have to be made to scale 1:1 with respect to the size of the pieces to be made. The drawing will be in millimetres, i.e. 1 point in the model space, 1 millimetre in reality.

- The drawing shall have a maximum of 5 layers, one for external cutting in blue, one for internal cutting in yellow, one for engraving in red, one in green for engraving at another level and, lastly, one in magenta with the size of the working area of the machine.

- The cutting layers shall be in blue or yellow, the line type shall be continuous and with a thickness of 0,0 mm.

- The engraving layers shall be in red and/or green, the line type shall be continuous and with a thickness of 0,0 mm.

- The text layer (any typography if it is not of vector character) shall be white, the line type shall be continuous and with a thickness of 0.0 mm.

- The working area layer of the machine shall not be altered.

- The drawing must only be of the parts to be worked on and within the margins of the working area of the machine.

- Neither 3D nor different explanatory drawings in the same file will be accepted.

- The file format shall be DXF.

- The laser machine does not use any toner or ink to make the engravings. The colours or tonalities obtained will depend on the material itself, that is to say, it DOES NOT MAKE COLOUR.

- The drawings WILL NOT BE ACCEPTED with blocks, groups, coverings, external references or similar. No overlapping lines may be superimposed on the drawings.

- The drawings WILL BE ALLOWED with POLYLINES OR SHADING, depending on the drawing it can be exploited to improve the execution of the drawing by the machine.


IMPORTANT !!!
Clean and check the file with the PURGE and OVERKILL commands (HAVING INSTALLED EXPRESS TOOLS).

THE OVERKILL COMMAND, IF YOU DON'T KNOW IT, WE EXPLAIN YOU HOW TO PASS IT AND WHAT PROBLEMS YOU CAN HAVE. YOU HAVE A LINK IN THE HELP SECTION.

NO shifts will be saved without bringing a definitive, revised and accepted file. If it is wrong, it will be modified as many times as necessary and then it will be put in turn.

The turns of use will be given per WEEK at the most and according to established criteria.

Pieces smaller than 12 x 12 mm. They should be avoided or not done in order not to lose them, as they are irretrievable.

Avoid sticks and similar, they will NOT be made. There is a high probability of losing them and that they turn out badly.

Once the file has been accepted and the date and time have been set, the relative centre of the plate where the work is to be carried out must be indicated on the material to be done before the work is carried out.

If the plate is made of methacrylate, THE PROTECTIVE PLASTIC MUST BE REMOVED FROM ONLY ONE of the sides.